A green industrial marker with quick-drying intense opaque ink and a width of up to 2 mm for drawing and writing on metal, the marker is suitable for temporary marks and easily painted over with alkyd, epoxy or rubber paint without erasing it first.
The trapezoidal tip of the marker is durable and allows for 3 different line widths, which are opaque water-proof and long-lasting.
Marker has a light and durable aluminium case which contains xylene-free fast-drying alcohol-based pigment paint.
The tip has a pump-like mechanism that controls the amount of paint that flows out.
Sakura Metal Marker can be used on metal, including galvanized steel, glass, concrete, wood and plastic, it leaves a visible mark at temperatures of 5 °C to 40 °C.
Before first use:
Shake the marker well with the cap closed. Put it tip up and using the even side of the cap push the tip in, releasing the pressure inside the case of the marker.
For writing:
Press the tip inside the case until the ink starts flowing. Wait for the tip to completely get wet without excessively pressing it. The thick ink will take about 3-5 minutes to colour the tip after it is initially pressed.
Storing:
Horizontal with a well-shut cap.